Brakes.

Big-brake kits, two-piece rotors, stainless lines and track-compound pads for European cars, sized to the power you're making and how hard you drive. Installed, bled and bedded at our Tempe shop.

Performance05 / 05
Parts
Calipers, rotors, lines, pads
Sized to
Power level and use
Fluid
Fresh, high-temperature
Finish
Bled, bedded, road tested
Estimate
In writing, before work
01 — Scope

What we fit.

More power needs more stopping. Brake upgrades are matched to the rest of the build, so the car stops as well as it goes.

01

Big-brake kits

Larger multi-piston calipers and rotors for more heat capacity, checked for clearance behind your wheels first.

02

Two-piece rotors

Aluminium hats with iron rings: less unsprung weight and better heat management under repeated stops.

03

Stainless lines

Braided lines that don't swell under pressure, for a firmer, more consistent pedal.

04

Pads

Street, dual-purpose or track compounds, chosen for how the car is actually used.

05

High-temperature fluid

A full flush with fluid rated for the heat your driving generates. Fluid boils long before pads give up.

06

Bed-in and road test

New pads and rotors are bedded in so they bite evenly from the first drive.

02 — Know first

What to know first.

Bigger isn't automatically better

A big-brake kit needs wheel clearance, and on some cars it changes front-to-rear balance. For most street cars, better pads, lines and fluid on the factory calipers are the right first step.

Track pads on the street

Track compounds are noisy, dusty and can bite poorly when cold. Unless the car goes to the track, a street or dual-purpose pad is the better choice.

Carbon-ceramic brakes

Carbon-ceramic rotors last a long time on the street and are very expensive to replace. Some owners run iron rotors for track days to protect them. We'll talk through what fits your use.

Fluid is maintenance

Brake fluid absorbs moisture over time and its boiling point drops. On a car that's driven hard, it's due more often than the factory schedule suggests.

03 — How it works

Sized, fitted, bedded.

01

Tell us the car and the use

Power level, wheels, and whether the car sees the street, the canyon or the track.

02

Review the plan

We measure what's there and check wheel clearance, then send a written estimate for the parts that make sense.

03

Install and verify

Fitted, bled with fresh fluid, bedded in and road tested before the car goes home.

04 — Questions

What people ask us.

Will a big-brake kit fit my wheels?

Not always. Larger calipers need clearance behind the spokes. We check fitment against your actual wheels before quoting.

Do I need a big-brake kit?

For most street cars, no. Pads, lines and fluid on the factory calipers solve most fade and pedal-feel complaints. Big kits earn their place on heavily modified or tracked cars.

Will track pads squeal?

Often, yes, and they make more dust. That's why we only recommend them for cars that actually go on track.

Written estimate · before any work

Need it to stop harder?

Tell us the car, the power and how you use it. We'll check what's there and quote the right upgrade in writing.

The rest of the build.

Most performance work is planned as a set. These are the other pieces, and the staged overview that ties them together.